山东小叉车的操作注意事项

山东永保机械是国内小叉车生产规模最大的厂家之一，是技术力量雄厚，产品系列档次最全的设计制造企业。服务网点众多，维修技师，配件供应充足，全国共有200多家经销商。拥有一支高级技师组成的专业维修队伍，随时准备为用户年生产能力达4000台。那么在使用小叉车时应该注意什么呢？
  
1、设备启动后，应注意倾听有无异响，并对工作装置进行空载运行。冬季工作，需带水温升至50摄氏度后方可进入工作状态。
After the device starts up, you should pay attention to any abnormal sound to listen to, and work-load operation device. Winter work before entering the working state, the need to bring the water temperature rose to 50 degrees Celsius after.
2、注意观察设备周围有无人员和障碍物，确保安全后方能起步。配合其他工种作业时，严格按照作业方案服从指挥人员的指挥。
Observe whether the personnel and equipment around obstacles in order to ensure safety after the start. When operating in conjunction with other types of work, in strict accordance with the operating plan obey the command of the command staff.  
3、行使时，最高时速不超过5KM一小时，不猛打方向、不急转弯，驾驶室外不准载人。行驶时，吊具应收至20尺箱位距离，行使中不随意伸展、升降吊具。作业半径内严禁站人，作业时，吊具、货物下严禁人员、车辆停留、通过。给托板装卸集装箱时，严禁驾驶室从箱体下经过。
When exercised, the maximum speed of not more than 5KM one hour, the direction is not too hard, not a sharp turn, allowed manned outside the cab. When traveling to a 20-foot container spreader bit receivable from the exercise are not free to stretch, lift spreader. Within the operating radius is prohibited to stand, when the job under spreader, goods prohibited personnel, vehicles stop by. When to pallet loading and unloading containers from the cabinet after the cab is prohibited. 
4、推码集装箱时，严禁用叉车横推箱体，以防箱缝中站人、摆物，造成伤害事故。当垛高超过4.5米，垛后又无靠山时，严禁叉车从垛上叉箱。
When push code containers, non-cross with a forklift to push the box to prevent the box crevices station who put objects, causing injury. When the stack height over 4.5 m, then no patron stack prohibited forklift fork box from the stack.

山东永保机械期待与您的合作，我公司在长期与广大新老客户的合作中积累了丰富的经验，使得我们的小叉车在同行业中更具独特性，深受广大用户的青睐和好评。

济南装载机：http://www.sdyongbaojixie.com/