- 首页 >> 济南装载机转向器配套组合阀有哪些功能?
1、济南装载机http://www.sdyongbaojixie.com/入口单向阀负责从油泵来的高压油经单向阀进入转向器的进油口,其作用是防止油液倒流,致使方向盘自动偏转,造成转向失灵。
Jinan loaders inlet check valve is responsible for the high-pressure oil from the oil pump to the steering gear through the check valve into the inlet, whose role is to prevent reverse flow,resulting in the automatic steering wheel deflection, causing steering failure.
2、安全阀的主要功能是当压力油到达安全阀设定压力时,安全阀打开泄油,提供转向系统压力的安全保护。
The main function of the safety valve when the pressure of the oil reaches the set pressure of the safety valve, open the drain valve, steering system pressure to provide security.
3、济南装载机http://www.sdyongbaojixie.com/双向过载阀主要负责当转向油缸受到外部冲击时,油缸内的压力升高,压力油到达过载阀设定压力时,过载阀打开泄油,对转向油缸实施过载保护。
Jinan loader when bidirectional overload valve is mainly responsible for steering cylinder when subjected to external shocks, the pressure within the cylinder increases, the pressure valve oil reaches the set pressure overload, overload valve open drain on the steering cylinder implement overload protection.
4、双向补油阀的主要功能是当油缸一腔压力高于过载阀调定的压力时,过载阀卸荷,油缸另一腔的补油阀补油,从而保证了系统不致产生气蚀现象。
Bidirectional up the oil valve main function is when the fuel tank of a cavity pressure is higher than the overload valve tone given pressure, overload valve unloading, fill up the oil cylinder to another oil valve chamber, thus ensuring the system will not generate cavitation.
推荐装载机产品
推荐装载机知识
- 装载机润滑系统有哪些功能?
- 装载机电磁阀如何检查?
- 济南装载机磨合期应该如何维护?
- 济南小型装载机的优点
- 装载机装卸操作注意事项
- 济南装载机配件空气压缩机出现故障怎么办?
- 装载机液压缸内漏如何判定?
- 济南装载机工作时应该怎么保养?
- 如何解装载机的一些常见故障
- 莱州装载机用油分析
- 济南小型装载机变速箱超越离合器故障判断
- 装载机轮胎爆胎如何处理?
- 济南二手装载机磨合期应该注意什么?
- 装载机在雨天作业注意事项
- 装载机厂家谈机油多少的影响有哪些?
- 装载机液压系统泄漏是怎么回事?
- 济南装载机配件润滑油如何选用?
- 小型装载机遇到突发故障及解决方案
- 山东装载机液压系统泄漏是如何引起的?
- 山东装载机使用前的注意事项