永保机械产品分类
    装载机案例推荐
    联系永保机械
  • 商河县永保机械制造有限公司
  • 手机:13964108518
  • 电话:0531-84917777
  • 传真:0531-84917777
  • 邮箱:2533082748@qq.com
  • 网址:www.sdyongbaojixie.com
  • 地址:济南市商河县怀仁镇工业园
    首页 >> 济南装载机磨合期应该如何维护?
    济南装载机磨合期应该如何维护?
    发布时间:2014-6-30 12:01:58    浏览:252次

    我公司从事济南装载机的销售工作,在市场中得到了广大客户的一致好评,下面给大家讲解一下济南装载机磨合期应该如何维护?
    1、注意经常检查润滑油、液压油、冷却液、制动液以及燃油油(水)位和品质,并注意检查整机的密封性.检查中发现油水缺少过多,应分析原因.同时,应强化各润滑点的润滑,建议在磨合期内,每班都要对润滑点加注润滑脂(特殊要求除外)。
    Note that regular checks of lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water) bit and the quality and attention to check the tightness of the machine. Inspection found that a lack of too much water, you should analyze the reasons for the same time, should be strengthened lubricate all lubrication points, recommended run-in period, each class must lubrication of lubrication points (except for special requirements).
    2、磨合期结束,应对机器进行强制保养,做好检查和调整工作,同时注意油液的更换和装载机的维护。
    The end of the run-in period, forced to deal with machine maintenance, inspection and adjustment of work to do, while paying attention to fluid replacement and maintenance of loaders.
    3、注意经常观察各仪表指示,出现异常应及时停车予以排除,在原因未找到、故障未排除前应停止作业。
    Note that each instrument instruction often observed, abnormalities should be excluded stop in time, the reason is not found, the fault is not ruled out before the operation should be stopped.  
    4、由于工程机械是特殊车辆,操作人员应接受厂家的培训、指导,对机器的结构、性能有充分的了解,并获得一定的操作及维护经验方可操作机器。生产厂家提供的《产品使用维护说明书》是操作者操作设备的必备资料,在操作机器前,一定要先阅读《使用维护说明书》,按要求进行操作保养。
    Because of construction machinery is a special vehicle, the operator should receive factory training, guidance, structure of the machine, the performance has a full understanding of, and access to certain operating and maintenance experience before operating the machine. Manufacturers to provide "product maintenance manual" is the operator to operate the equipment necessary information before operating the machine, be sure to read the "maintenance manual", according to the requirements of operation and maintenance.  
    5、保持机器清洁,及时调整、紧固松动的零部件以防因松动而加剧零部件的磨损或导致零部件丢失。
    Keep the machine clean, timely adjustment, tighten loose parts to prevent loosening due to increased wear of parts or cause parts missing.  
    6、注意磨合期的工作负荷,磨合期内的工作负荷一半不要超过额定工作负荷的60%,并要安排适合的工作量,防止机器长时间连续作业所引起的过热现场的发生。
    Note that the workload of the run, the run-in period, half of the workload should not exceed 60% of the rated working load, and to arrange for appropriate workload, long continuous operation to prevent the machine from overheating caused by the occurrence of the scene.  

    公司视产品质量为企业生命,十分注重产品的研发和创新,强化质量保障体系,加强质量检测和监控,受到了广大用户的一致好评,我们永保机械值得您的信赖,期待与您的合作。

    济南装载机http://www.sdyongbaojixie.com/