永保机械产品分类
    装载机案例推荐
    联系永保机械
  • 商河县永保机械制造有限公司
  • 手机:13964108518
  • 电话:0531-84917777
  • 传真:0531-84917777
  • 邮箱:2533082748@qq.com
  • 网址:www.sdyongbaojixie.com
  • 地址:济南市商河县怀仁镇工业园
    首页 >> 济南装载机安装时应如何防止油液的污染?
    济南装载机安装时应如何防止油液的污染?
    发布时间:2014-6-25 18:45:55    浏览:540次

    济南装载机日常作业都需要油的润滑,那么装载机在安装时应该如何防治油液的污染,现在由永保机械的有关专家给大家介绍一下。
    1、济南装载机液压泵的吸油口应安装粗滤器,且吸油口处应距油箱底部一定距离;
    Jinan loader hydraulic pump Suction strainers should be installed, and the suction mouth should be a certain distance from the bottom of the tank;
    2、济南装载机出油口处应安装高压精滤器,且过滤效果应符合系统的工作要求,以防污物堵塞而引起液压系统故障;
    Jinan loader should be installed at the oil port high pressure fine filter, and the filter effect should be consistent with the system requirements for the work to prevent dirt clogging caused by the hydraulic system failure;
    3、济南装载机的液压油箱隔板上应加装过滤网,以除去回油过滤器未滤去的杂质。
    Jinan, the filter should be installed on the hydraulic tank partition loader to remove the oil filter is not filtered back to impurities.
    4、济南装载机液压缸上应安装金属防护圈,以防污物被带进缸内,并可防止泥水和光辐射对液压缸侵蚀而引起泄漏;液压元器件安装前应检查、清理干净其内部的铁屑及杂质;

    Jinan loader should be installed on thehydraulic cylinder metal protective ring to prevent dirt being brought into the cylinder, optical radiation and prevent mud and erosion caused by the hydraulic cylinder leakage; hydraulic components should be checked prior to installation, clean the inside of the iron debris and impurities;
    5、定期检查液压油,一旦发现油液变质、泡沫多、沉淀物多、油水分离等现象后应立即清洗系统并换油。新油加入小型装载机的油箱前应经过静置沉淀,过滤后方可加入,必要时可设中间油箱以进行新油的沉淀和过滤,确保油液的清洁。
    Regularly check the hydraulic oil, once discovered oil deterioration, foam and more and more sediment, oil and water separation phenomenon should immediately wash system and oil changes. Small loader before adding new oil tank should be standing after sedimentation, filtration before adding, if necessary, can be set for the middle of the tank sedimentation and filtration of new oil to ensure clean the oil.

    济南装载机http://www.sdyongbaojixie.com/