永保机械产品分类
    装载机案例推荐
    联系永保机械
  • 商河县永保机械制造有限公司
  • 手机:13964108518
  • 电话:0531-84917777
  • 传真:0531-84917777
  • 邮箱:2533082748@qq.com
  • 网址:www.sdyongbaojixie.com
  • 地址:济南市商河县怀仁镇工业园
    首页 >> 如何解装载机的一些常见故障
    如何解装载机的一些常见故障
    2017-2-10 11:07:35

    在日常中对装载机的保养是很有必要的,有时候可以减少一些不必要的安全隐患,下面小编就为大家简单介绍一下装载机常见故障及原因。In the daily maintenance of the Shandong loader is very necessary, and sometimes can reduce some unnecessary security risks, the following Xiaobian for everyone to briefly introduce the common fault and cause of the Shandong loader.

    1.装载机挂挡时,不能顺利进入挡位的原因有。压力阀压力过低;液压泵工作不良,密封不好;液压管路堵塞;离合器密封圈损坏、泄露;挂挡阀杆不到位。The reason why the Shandong loader can not get into the gear when it is hanging. The pressure of the pressure valve is too low; the hydraulic pump is not working well, and the sealing is not good; the hydraulic pipeline is blocked; the sealing ring of the clutch is damaged and leaked; the valve rod is not in place.

    2.变速箱变速时,挡位脱不开的原因有。装载机活塞环胀死;离合器摩擦片烧毁;离合器回位弹簧失效或损坏;回油管路堵塞。Gear shift, the gear can not be separated from the reasons for. The piston ring of the loader in Shandong is dead; the clutch friction plate is burnt out; the return spring of the clutch is invalid or damaged.

    3.已挂上挡,但装载机运行乏力,甚至不能行走的原因有。摩擦片磨损严重,间隙过大;离合器自动倒空阀密封不严,使压力下降;换挡操纵阀管路堵塞;切断阀不能回位;变速阀定位弹簧疲劳或折断,钢球跳动;离合器活塞环,密封圈磨损严重,使泄露严重。Has been put on the block, but the Shandong loader operation is weak, and even can not walk for the reasons. Friction wear, the gap is too large; the clutch automatic emptying valve seal, the pressure drop; the shift control valve pipe blockage; shut-off valve can not return; variable valve positioning spring fatigue or fracture, ball beating; clutch piston ring, the sealing ring wear serious, so serious leakage.

    装载机常见故障及原因就为大家简单介绍这些了,我公司知名的装载机厂家之一,欢迎大家前来选购,更多内容请大家继续关注我们的网站或者直接联系我们。Shandong loader common fault and the reasons we introduce these, our company well-known Shandong loader is one of the manufacturers, welcome everyone to come to buy more content, please continue to pay attention to our website or contact us directly.