永保机械产品分类
    装载机案例推荐
    联系永保机械
  • 商河县永保机械制造有限公司
  • 手机:13964108518
  • 电话:0531-84917777
  • 传真:0531-84917777
  • 邮箱:2533082748@qq.com
  • 网址:www.sdyongbaojixie.com
  • 地址:济南市商河县怀仁镇工业园
    首页 >> 高卸王装载机运动部件伤害如何防止?
    高卸王装载机运动部件伤害如何防止?
    2016-5-21 9:06:03

    1、凡易造成伤害事故的高卸王装载机http://www.sdyongbaojixie.com/运动部件均应封闭或屏蔽,或采取其他避免操作人员接触的防护措施,以操作人员所站立平面为基准,凡高度在2m以内的各种传动装置必须设防护装置,高度在2m以上的物料输送装置和皮带传动装置应设防护装置。
    Where is easy to cause accident high unloading Wang loading machine moving parts shall be closed or shield, or take other avoid operator contact with protective measures, to operating personnel stand plane as a reference, where the

    height of less than 2m drive devices must be set protective device, highly in 2M above the material conveying device and a belt driving device protection device should be set up. 

    2、高卸王装载机为避免挤压伤害,直线运动部件之间或直线运动部件与静止部件包括墙、柱之间的距离,必须符合有关安全距离的规定,机械设计应保证不该通过的身体部位不能通过。
    High discharge King loader to avoid extrusion injury, linear motion between components or linear motion and stationary components including the distance between walls and columns, must comply with the provisions of the relevant safety

    distance and mechanical design should be guaranteed by the through parts of the body can not. 

    3、高卸王装载机应根据需要设置可靠的限位装置,机械设备必须对可能因超负荷发生损害的部件设置超负荷保险装置。
    High unloading King loader should be based on the need to set up a reliable limit device, mechanical equipment must be on the part of the damage due to overload overload insurance device. 

    4、高卸王装载机http://www.sdyongbaojixie.com/高速旋转的运动部件应进行必要的静平衡或动平衡试验,有惯性冲撞的运动部件必须采取可靠的缓冲措施,防止因惯性而造成的伤害事故。
    High discharge King loading high-speed rotation of the moving part of a machine should be carried out the necessary static balance and dynamic balance test, collision inertia of moving parts must take reliable measures to cushion to prevent hurt accidents caused by inertia.