永保机械产品分类
    装载机案例推荐
    联系永保机械
  • 商河县永保机械制造有限公司
  • 手机:13964108518
  • 电话:0531-84917777
  • 传真:0531-84917777
  • 邮箱:2533082748@qq.com
  • 网址:www.sdyongbaojixie.com
  • 地址:济南市商河县怀仁镇工业园
    首页 >> 装载机制动器活塞卡死怎么办?
    装载机制动器活塞卡死怎么办?
    发布时间:2015-3-15 16:54:37    浏览:681次

    装载机钳盘式制动器是装载机配件的一种,其防污能力差,活塞常因锈蚀或太脏而卡死。
    Shandong loaders caliper disc brake is a loader accessories, and its anti-fouling ability, often due to corroded or dirty piston and stuck.
     
    装载机活塞卡死不是很严重时,可以用撬棍橇出,或用锤子敲打制动器背面使其靠惯性振出;卡死过紧时,可在制动器正对活塞中心的背面钻一个8mm的通孔,然后用冲子或螺栓伸入孔中用锤子敲打,就很容易将活塞取出。修复或更换后,再用M10的丝锥在孔内攻丝,然后用M10乘10的螺栓及铜垫片堵住此孔。
    Shandong loaders live Fonseca died not very serious, you can ski out with a crowbar, or with a hammer on the back of it by inertia brake vibration out; when stuck tight, in the center of the brake piston is on the back of an 8mm drill through hole, and then inserted into the hole punch or bolt with a hammer, it is easy to remove the piston. Repair or replacement, and then tap in the hole tapping M10, M10 and then multiply by 10 bolts and copper gaskets block this

    hole.