- 首页 >> 济南装载机变速箱跳挡怎么办?
济南装载机http://www.sdyongbaojixie.com/变速箱是装载机中重要的配件之一,在装载机工作过程中,经常出现乱挡或跳挡等现象,装载机变速箱乱挡或跳挡直接原因是变速阀杆定位不准确,如变速阀杆与阀体内两只定位钢球没有对准人槽或两只定位钢球之间的弹簧损坏因而定位错乱变速操纵杆由于长期受拉、推操纵力的作用杆系,位置或长度发生了变化使操纵位置产生偏差因而造成错位。
Jinan loader gearbox is one of the important parts loader, loader work in process, often chaotic phenomena such as block or skip, or skip loader gearbox chaos is the direct cause of the shift gear stem positioning is not accurate a shifting the stem and the valve body positioning two balls did not spring damage at a person or two slots positioned between the balls and thus positioning confusion due to the long-standing role in the shift lever pull, push rod system control force, position, or length changes in the position of the manipulator deviations thereby causing dislocation.
济南装载机http://www.sdyongbaojixie.com/变速箱跳挡时应该先拆下变速阀杆与操纵杆的连接销,用手拉动变速阀杆使阀杆处于空挡位置,再将操纵杆手柄扳到空挡位置,最后调整各杆系连接处的位置及改变其长度,并将处于空挡位置的操纵杆手柄和处于空挡位置的变速阀杆重新连接起来。
Jinan loader gearbox should be removed when the jump gear shift lever connecting pin stem and hand speed to pull the stem so that the stem is in the neutral position, and then pull the handle lever to the neutral position, and finally adjust the truss position and change its length, and the handle is in the neutral position and the lever is in the neutral position of the shift reconnect stem junction.
推荐装载机知识
- 济南装载机有哪些用途?
- 装载机启动过程中需要注意哪些问题?
- 山东装载机磨合期内的保养常识
- 山东装载机的柴油机水箱中有油是怎么回事?
- 浅谈小型装载机油压不足的原因
- 装载机变矩器过热有哪些原因?
- 要经过培训以后才能上岗操作山东装载机
- 装载机油耗增加如何处理?
- 小型装载机如何进行排气?
- 装载机的操作要等油温稳定后
- 山东矿用装载机的特点
- 山东装载机机芯出现裂纹怎么回事?
- 济南装载机变速器原位检修的步骤
- 山东装载机一挡驱动无力其它挡位正常是啥情况?
- 如何对装载机加注冷却液?
- 高卸王装载机长时间不用如何处理?
- 道依茨一汽大柴2013销售发动机10.7万台 增长21%
- 小型装载机的维护细节
- 在隧洞施工中装载机使用注意事项
- 装载机制动系统如何维护?